[. . . ] Application GHM007 Instrument Height Meter and GHT196 Spacing Bracket are used together to simply, rapidly and reliably determine the height of the instrument (ground - tilt axis) for instruments with a tilt axis height of 196 mm. [. . . ] € Following completion of the height measurement, we recommend to remove the GHM007 and GHT196. Care and storage Avoid soiling; if necessary clean tape measure with a soft cloth. In the case of large temperature differences, note following table for precise measurements. Determining instrument height Place tripod centrally over the point on the ground, level instrument. Swivel measure in the direction of the point on the ground, pull out until the tip of the measuring tongue touches the point on the ground, keep under tension and do not allow to sag, clamp if necessary. Read height of the instrument (ground - tilt axis) in the reading window at the red marking (in the example 1. Com Ask your local Leica Geosystems agent for more information about our TQM program. Bruksformål Instrumenthøydemåleren GHM007 og avstandsholderen GHT196 kan brukes sammen for en enkel, rask og sikker bestemmelse av instrumenthøyden (avstanden mellom oppstillingspunktet og kippaksen) for instrumenter med en kippaksehøyde på 196 mm. [. . . ] Com Ask your local Leica Geosystems agent for more information about our TQM program. [. . . ]